Imagine having a blueberry packing line perfectly designed to match your unique production needs and volumes. At Smartpack, we transform this vision into reality, offering end-to-end solutions for growers and businesses dedicated to packaging blueberries. Our services span from simple setups to expansive packing systems, each meticulously planned to ensure optimal performance. High Automation [...]
Remove all feed hopper and feeder pan of multihead weigher Record the location of the waterproof cover so that you can quickly mount it back to the same location Remove all dust ring of waterproof cover Find the solid screw on the waterproof cover and remove it all Then lift the waterproof cover up Then find [...]
Remove all feed hopper and feeder pan of multihead weigher Record the location of the waterproof cover so that you can quickly mount it back to the same location Remove all dust ring of waterproof cover Find the solid screw on the waterproof cover and remove it all Then lift the waterproof cover up Then find [...]
Tools to be prepared:M10 sleeve,hexagon wrench NO.4,hexagon wrench NO.5,hexagon wrench NO.6,cross screwdriver 1.Remove the aluminum specimen box from multihead weigher. 2.Observe the gap between sensor protection sheet. 3.Hang back weigh hopper and check whether the screws on both sides of the weigh hopper will touch the aluminum specimen box or not.If yes,then need to loosen the [...]
First, open recipe(for example, if use 10 head weigher weigh 4000g, weighingtwice, open recipe of weighing 2000g) Open the first page of parameter setting interface, change target weight to4000g. Find parameter of “Multi Combine Times” in the second page of parametersetting interface, change to 2. Click the button in the parameter setting interface, then enter the function [...]
1.Check weigher frequency converter setting 2-00:d1, frequency enter source, by external current 0-10v 2-01:d2, operated by external terminal. Keyboard STOP can work. 4-04:d2,M0: run/stop, M1: forward/reverse 1-00:60 1-01:60 2-00:d1, frequency enter source, by external current 0-10v 2-01:d2, operated by external terminal. Keyboard STOP can work. 4-04:d2,M0: run/stop, M1: forward/reverse 1-00:60 1-01:60 1-09 the first acceleration time [...]
1.Open the cabinet which is on the face of switch as below picture, and find out power supply. 2.Then measure 203+ and 203- by multimeter, valid voltage should be DC24V . 3.If the voltage is 24V, which means the power supply is no problem, the problem will be either screen or the cable which connect between cabinet [...]
1.Open the cabinet which is on the face of switch as below picture, and find out power supply. 2.Then measure 203+ and 203- by multimeter, valid voltage should be DC24V . 3.If the voltage is 24V, which means the power supply is no problem, the problem will be either screen or the cable which connect between cabinet [...]
Firstly, take down the No.1 aluminum box, find motor position line and measurethe voltage to see whether there is about 18 v DC by a multimeter. If there is no 18 v voltage, open the machine frame that is on the right of the emergentstop button Find out the main board of multihead weigher, there is [...]
Analysis: The thickness of the material directly affects the multihead weigher’s accuracy, thus affecting the actual production accuracy. If the material is too thick ,the phenomenon of excess weight is often present. If too thin,weighing hopper feed for many times so as to affect the rate of combined balance, the weigher’s speed will be slower as [...]
