Packing Long Gummies into 99 g Bags for a U.S. Customer

When a candy manufacturer asks me about packing gummies, I usually ask to see the product before talking about machine speed. The word gummy covers a lot of different shapes and surfaces. What runs well for a short, firm piece may give you trouble with a long one.

A project we supplied in the U.S. is a good example. The customer wanted 99 g pillow bags with a Euro hanging hole. Our published project information lists 30 packs per minute. The pack specification was clear, but we still had to make sure the long gummies could reach the scale in a steady flow. That was the part of the job I would pay attention to on any similar line.

How we set up the line

The line used a Z-bucket elevator to bring the gummies up to a 10-head multihead weigher. From there, weighed portions went to a vertical form fill seal machine, followed by an output conveyor and collection table. The weigher sat on a support platform, as it would on many bagging lines.

We packed this product by weight. The 10-head weigher was set up for a 99 g target, so the number of individual gummies in a finished bag could vary. That distinction matters when customers show me a retail pack and ask for an equivalent line: if the label or assortment calls for a fixed number of pieces, I would look at the application differently.

For this project, we used a 10-head weigher with 1.6 L weigh hoppers. We paid particular attention to the feed points, where the product’s length could affect how evenly it moved toward the weighing heads.

What we changed around the weigher

We customized the shape and angle of the feeding pans for the long gummies and specified a smaller angle for the feeding chute. Those details may sound minor next to the VFFS machine, but they influence whether each head gets a useful supply of product when the weigher needs to make the next 99 g portion.

If the feed comes through in clumps or favors a few heads, the scale has fewer combinations to choose from. The bagger may be ready for the next fill while the weigher is still waiting for product. That is why I would rather discuss the candy’s length, surface and behavior in motion than quote a bagging speed based only on its target weight.

I would also avoid turning the adjustments from this project into a standard prescription for all gummies. A sugar-coated piece, an uncoated piece and a gummy that becomes tacky after sitting in a warm room may need different handling. The U.S. installation shows the kind of feeding detail we can change; it does not mean the same pan settings will suit every recipe.

What I’d check on the next gummy project

The published specification for this U.S. project is 99 g per bag at 30 packs per minute. It gives another candy producer a useful point of reference: a long gummy, a 10-head weigher, 1.6 L hoppers and a pillow bag with a hanging hole.

I would not take that number and put it straight into a proposal for a different gummy. A longer piece, a different coating or a larger bag can change how quickly the weigher can prepare a portion. The film, bag dimensions and hanging-hole placement also need to work together at the requested rate. Before we agree on output, we need to run the actual product and check finished packs, not just watch the machine cycle empty.

For a new project, I would ask for gummies from a normal production run, along with the proposed film and bag drawing. We would check how the pieces spread across the feeding pans, enter and leave the hoppers, and move through the filling tube. Then we would review finished bag weights, seal quality, the position of the Euro hole and the rate the line can maintain with product. If the candy changes noticeably over a shift, the trial should reflect that too.

When I discuss this U.S. installation with other candy producers, I point to the feeding pans and chute. The finished bag was a familiar retail format, but the long gummy shape required us to adjust how product reached the scale. That detail is easy to miss if the conversation starts and ends with bag weight and machine speed.

If you are planning to pack long gummies, send Smart Weigh USA your product samples, target bag weight, bag drawing and required output. We can work through the feed arrangement with you before settling on the weigher and bagger. See our candy packaging solutions or email info@smartweighusa.com.