Why We Used a Multihead Weigher to Count Ring Candy
A U.S. candy producer came to us with three pack counts for the same ring-shaped candy: 30 or 50 pieces in a pillow bag, and 20 pieces in a stand-up pouch. The factory also wanted to premix several flavors before filling. Other suppliers had proposed dedicated counting machines. Because the customer expected to package other products by net weight in the future, we recommended a multihead weigher that could run in either piece-count or standard weighing mode.
That decision is the part of this project I bring up when other candy manufacturers ask me about counting equipment. A combination weigher gave the customer a way to make counted bags today while keeping the weighing function available for another product tomorrow. The two bag formats still needed their own packing machines, but both systems used the same type of 14-head weighing technology.
Counting pieces with a combination weigher
In counting mode, the multihead weigher uses its weighing heads to build a portion for the selected piece count. It does not have to line up every ring candy and pass it individually through an optical sensor. Several hoppers can prepare product at once, and the machine selects a combination to discharge into the bagger.
That has two practical benefits. The first is product flexibility. The counting method does not depend on every candy having the same outline or facing the same direction as it passes a detector. We can consider ring-shaped, round or irregular wrapped candies on the same general weighing platform, provided they feed and discharge reliably and their individual weights are consistent enough for the requested count. A different shape may still need adjustments to the feeding path or hopper size.
The second benefit is output. The heads work in parallel, so the weigher can prepare portions without waiting for every piece to pass a single counting point. For a suitable candy and target count, that can be faster than a counter that must separate and detect pieces one at a time. I would compare actual machines with the customer’s candy before promising a speed advantage: counter design, piece-weight variation, bag size and the packing machine all affect the result. This U.S. project’s three documented rates show what our configured lines were specified to do.
When the factory moves to a product sold by weight, the operator can switch the weigher to standard weighing mode. A dedicated piece counter would not provide that weighing function. For a manufacturer with both counted and weight-based SKUs, this matters beyond the first candy order.
Premixing the flavors ahead of the scale
The customer also wanted several wrapped candy flavors in each finished bag. We put a belt conveyor before the Z-bucket elevator to bring the flavors together. The conveyor starts or stops according to the product level at the elevator inlet, helping keep the weigher supplied without running the upstream feed continuously.
That setup creates a mixed assortment; it does not guarantee a fixed number of each flavor in every bag. If the recipe requires, for example, five pieces of one flavor and five of another, we would need separate control over those products before they enter the bag. The distinction is worth settling before anyone specifies a counting machine or a multihead weigher.
The 30- and 50-piece pillow bags
For the pillow bags, we supplied a Z-bucket elevator, SW-M14 14-head weigher with 2.5 L hoppers, support platform and SW-P720 VFFS machine. Finished packs went through an output conveyor and SW-C420 checkweigher to a collection table. The bags were 300 mm wide, with lengths from 400 to 450 mm.
The project documents different rates for the two counts:
| Count per pillow bag | Reported packing rate |
|---|---|
| 30 pieces | 31–33 bags per minute |
| 50 pieces | 18–20 bags per minute |
Those figures are more useful than a single speed claim. A 50-piece portion takes longer to prepare than a 30-piece portion on this setup, and the filled bag also has more product to clear through the machine. If most of your orders are for 50-piece bags, plan capacity around the 50-piece rate.
These rates give candy producers a concrete production reference. A direct speed comparison with another counter would require a trial using the same candy, bag and target count.
The 20-piece stand-up pouch
The pouch format used another SW-M14 14-head weigher with 2.5 L hoppers, feeding an SW-8-200 rotary premade pouch machine. Its output conveyor led to an SW-C320 checkweigher and collection table. The pouch was 200 mm wide by 330 mm long and had no zipper.
For 20 pieces per pouch, the documented rate was 27–30 pouches per minute. I keep this number separate from the pillow bag speeds when discussing capacity with customers. A rotary pouch machine has to pick up, open, fill and seal an already-made bag. The rate for that format cannot be applied to the VFFS line or to a different pouch closure without testing.
Using multihead weighers on both lines also made the counting approach familiar across the factory’s two pack formats. The packer changed, but the customer could use piece-count mode for the ring candy and retain a weight mode for other products that fit the system.
What I would test before quoting your candy
Weighing-based piece counting depends on the relationship between piece weight and piece count. Before setting a guaranteed count, I would check the weight range of individual candies, including all flavors in the proposed mix. If one flavor is noticeably heavier or if piece weights vary widely within a flavor, the finished portion weight alone may not distinguish one count from the next reliably.
I would run representative production samples, not just a few perfect pieces. We would observe feeding and discharge, set up the count recipe, then open and hand-count bags pulled throughout a trial. The downstream checkweigher verifies finished bag weight; it cannot independently certify the number of candies inside when piece weights vary. That is why actual count checks belong in acceptance testing.
This project is a useful reference if you need counted packs now and may need weight-based packs later. Send Smart Weigh USA your candy samples, piece-weight range, pack counts, bag drawings and required output. We can test whether a multihead weigher is the right counting method and confirm the speed for each SKU. See our candy packaging solutions or email info@smartweighusa.com.

